Russell Products Company ProfileHow to order from Russell ProductsRPI Core Values and MissionContact Russell Products IncorpoartedRussell Products, Incorporated Return to Home Page
Our Stretch Wrap saves you time and money on shipping & handling pallets. Tools for every need! Protect your surfaces with Russell's line of Surface Shields. Our Stretch Wrap saves you time and money on shipping & handling pallets. Tools for every need! Poly foam sealants, cleaners and guns. Protect your surfaces with Russell's line of Surface Shields.
Indiana Based
Manufacturer & Distributor
to International Industry
An overview of the Russell Products Product Line. Don't see what you want? We can get it.

From bandsaw blades, to bits, to spray adhesives and more. Russell Products is your Supplier.

POLY BAGS Available by special order only. Minimums and lead time apply.

The Russell Line of Polyethylene Bags are made by heat sealing and cutting rolls of film. Rolls of tubing or sheeting are fed through a machine that draws material out to the proper length. The machine then cycles to place a seal on the material, or to gusset them, and then cut it off to make an individual bag. Using up-to-date manufacturing technology, the machines that produce our line of polybags employ servo drive motors for optimal control and accuracy.

In some cases, particularly with larger bags, such as Gaylord or Drum liners, it is convenient to have the bags put up on rolls for easier dispensing. Smaller bags are also available on continuous rolls perforated at specific lengths or individually boxed to meet customer demands.

Polyethylene Single Wound Sheeting: Widths for poly sheeting can range from 1” wide up to 87” wide. Gauges range from .0005 to .020 in thickness.

Polyethylene Centerfold: Centerfold poly is much the same as tubing except that one edge of the film is slit open. Sizes range from 4” (opens to 8” wide) up to 87” (opens to 174” wide).

Other Features:

  • Bottom sealed or side sealed bags on rolls for multiple applications.
  • Polybags are run in-line, sealed and perforated for easy tear off.
  • Bags are wound onto 3" ID cores and poly-wrapped for protection
  • May be FDA approved for food industry
  • Films are available in clear and colors


CONTINUOUS TUBE back to top

Polyethylene Tubing: Poly tubing is made using the blown film process. A continuous tube of poly film is extruded for widths that range from 2” to 68” and up to 120” if gusseted.

For more information or a sample of this product please call Russell Products or CLICK HERE to email us.


POLY BAGS back to top

PARTS BAGS

Bottom Sealed: Poly Bags are made using poly tubing material and applying a seam to one end of the material. Bottom seal construction is commonly used for side gusseted bags and bags thicker than .004. Sizes range from 4 x 8 to 50 x 120.

Please Note measuring instructions when placing your order.

For more information or a sample of this product please call Russell Products or CLICK HERE to email us.



GAYLORD OR BOX LINERS back to top

Box Liners: are perfect for Gaylord containers. The gusseting allows the lilner to expand as needed to fit the box.

Please Note measuring instructions when placing your order.

For more information or a sample of this product please call Russell Products or CLICK HERE to email us.


DRUM LINERS back to top

Drum liners: protect the inner drum surface from erosion, wear and corrosion as well as protecting against leaking. Drum liners conform to the inside diameter.

Please Note measuring instructions when placing your order.

For more information or a sample of this product please call Russell Products or CLICK HERE to email us.


GUSSETED BAGS back to top


Gusseted Bags: A continuous tube of poly film is extruded for widths that range from 2” up to 120” if gusseted.

Please Note measuring instructions when placing your order.

For more information or a sample of this product please call Russell Products or CLICK HERE to email us.


THE PROCESS back to top


The Russell Line of Poly Bags are made using the Blown Film Extrusion process in which small plastic pellets (called resin) are melted down under controlled conditions so that they are pliable molten actually and pressed (extruded) through a circular die gap to form a continuous tube of plastic as thin as .0004 inch to thicknesses that may go beyond .01 inch. Sometimes pellets containing pigment are blended with the clear pellets to make film of various colors.



Russell Products is located in Bristol Indiana. Est in 1988.
17989 Commerce Drive, Bristol, Indiana 46507
Ph: 574-848-5650 Fax: 574-848-5610
russell@russellproducts.com

©2005 Russell Products Incorporated. All rights reserved.